A good, fully stocked toolbox should always contain more than just five tools. That’s a rule that can’t be overlooked. A toolbox with five or less tools can never be a complete toolbox, and it will leave you wanting for the tool you need too many times.
However, just as every toolbox needs to have more than five tools, there are roughly five tools that simply have to be included in every toolbox. These are the essential tools that every versatile toolset, like the one made by Wilson & Miller, must contain, because without them you wouldn’t be able to do even the basic DIY stuff around the house.
And not any hammer, for that matter, but a claw hammer. The claw hammer is used to, as it name says, hammer nails into surfaces by using one of its sides, or to remove the nails from a surface by using the other side. When buying a hammer, it’s important to keep in mind the work you’ll need it for. Small hammers are used for hammering small nails, and the bigger the nail, the bigger the hammer needed for it. An average hammer should weigh around one pound, and have a 16-inch long handle. Make sure that it fits your hand nicely, and that you’re able to maintain a firm grip while swinging it, because you don’t want the hammer flying out of your hand while you’re trying to hammer a nail.
There’s no such thing as a universal screwdriver. They come in different sizes, and in two very different types – flathead and Philips head. When looking for those, you want to look for a set which contains both flathead and Philips head screwdrivers in a range of sizes. Alternatively, you can get two separate sets, one with flathead screwdrivers and one with Philips head screwdrivers. If you can get only one set with only one type of screwdrivers, aim for flathead, because they can be used with Philips head screws, although they will cause uneven wear of the head of the screw eventually. The important thing is that a toolbox without tools to handle screws is not a very good toolbox, so make sure yours has some screwdrivers.
An adjustable wrench is the best thing you can have in your toolbox if it doesn’t already have a full set of wrenches. And if it would have a full set of wrenches, you’d still need an adjustable one. No fastener head, be it a bolt or a nut, no matter what size it might be, can resist being loosened or tightened with a crescent wrench. Plus, because it’s a tool that performs a function of many tools of different sizes, a crescent wrench is very practical – it can save space in your toolbox, and it can be worn on a tool belt.
There’s more type of pliers than just one. Pliers are a gripping tool, although some come with a section that can be used for cutting. Because they are usually serrated, whatever you use the pliers with will be damaged if not properly protected. Just how fine of a thing you need to grip with the pliers will determine what type of plier you need. If you plan to work with electronics, you’ll need the needle-nose pliers. If you want something that will be able to grip plumbing pipes, you can use water-pump pliers. If you want the most versatile option, you should go with linesman’s pliers, which can both grip and cut.
Because drilling by hand can be tiring and very time consuming, an electric drill should be a part of every toolbox. It doesn’t have to be a big power drill if you don’t plan to do some heavy construction work or drill through concrete walls, but it has to have enough power to be useful around the house. The best thing about electric drills is that they come with many different attachments, called bits, so they can be used instead of screwdrivers in certain circumstances, they can sand and grind materials, or even be used for stirring paint. They come in cordless and corded varieties, with the former being more expensive and portable, and the latter being less expensive and cheaper to maintain.
Wilson And Miller
Author